Master in Sustainable Building

2025/2026 · 60 credits

Quality assurance

All UDC centers have a Internal Quality Assurance System (IQAS), verified by the Agency to Calidade do Sistema Universitario de Galicia (ACSUG) and ANECA in FIDES programs and AUDIT, respectively, and in accordance with the standards and Guidelines for Quality Assurance in the EHEA. Within IQAS centers integrate all their degrees and masters. IQAS procedures established who and how to follow up and monitoring of the results and the student's learning process in the titration, establishing coordinating bodies and mechanisms, evaluation and continuous improvement of the studies, which are the academic comittee and the quality assurance commision of center.

Learning outcomes

The IQAS establish how UDC centers measure and analyze the learning outcomes. To do the IQAS uses rates and global indicators for assessing the quality of training provided. Included among the results, in addition to the fees included in the title verification reports (efficiency rates, graduation and dropout), assessment rates, success and performance. We compare the results obtained in the title with the center's results for each indicator.

Academic years results

Quality assurance

To ensure that the title is developed in accordance with the verification report presented the center conducts an annual monitoring report in accordance with the procedures of the center IQAS and results. This report is reviewed by the ACSUG, external evaluation agency.

The outcome of this analysis will emerge corrective actions and improvement proposals that achieve the intended objectives and the improvement of the degree.

Committees

In order to ensure proper standards and quality at UDC, an academic management committee and a quality assurance committee are appointed for each faculty/school. In addition to, each faculty/school will be able to establish a specific academic management committee of the study.

Pérez Ordóñez, Juan Luis
Presidente
Losada Pérez, Carlos

González Sarceda, Manuel

Lamas López, Valentín

Benítez García, Marta

De La Rosa García, María Del Pilar

Rodríguez González, Lourdes
Estudiantado
Herdoíza Flores, Jean Carlos
Estudiantado
Alonso Fernández, María Del Carmen
Personal técnico, de gestión y de administración y servicios
Carballal Graña, Susana

Pérez Ordóñez, Juan Luis
Presidente
De La Rosa García, María Del Pilar
Vicepresidenta
Losada Pérez, Carlos

González Sarceda, Manuel

Álvarez Díaz, José Antonio

Herdoíza Flores, Jean Carlos
Estudiantado
Godón Rodríguez, Lidia María
Estudiantado
Gómez Diego, Natividad Estefanía
Personal técnico, de gestión y de administración y servicios
Hermo Sánchez, Víctor Manuel
Vogal Coordinador de Título
Martínez Carballo, Manuel
Vogal Coordinador de Título
Benítez García, Marta
Vogal Coordinadora de Título
Carballal Graña, Susana

Study facts

Study data

Students enrollment Period Value
Students count 2023 31
Men 2023 14
Women 2023 17
Credits enrolled Period Value
Total enrolled credits 2023 645
Credits on 1st enrollment 2023 306
Credits on 2nd enrollment 2023 201
Credits on 3rd enrollment and above 2023 138
% credits repeated 2023 52.56
Academic results Period Value
Average credits by student 2023 20.81
Evaluation rate 2023 67.28
Success rate 2023 99.32
Performance rate 2023 66.82
SEGUIMIENTO rates Period Value
Efficiency rate 2023 72.63
Graduation rate 2023 33.33
Leaving rate 2023 33.33

Centre data

Student enrollment Period Value
Students count 2023 280
Men 2023 141
Women 2023 139
Credits enrolled Period Value
Total enrolled credits 2023 11,956.5
Credits on 1st enrollment 2023 8,325.5
Credits on 2nd enrollment 2023 2,194
Credits on 3rd enrollment and above 2023 1,437
% credits repeated 2023 30.37
Academics results Period Value
Average credits by student 2023 42.7
Evaluation rate 2023 70.45
Success rate 2023 75.84
Performance rate 2023 53.43

Study data

Students enrollment Period Value
Students count 2024 45
Men 2024 19
Women 2024 26
Credits enrolled Period Value
Total enrolled credits 2024 1,758
Credits on 1st enrollment 2024 1,512
Credits on 2nd enrollment 2024 129
Credits on 3rd enrollment and above 2024 117
% credits repeated 2024 13.99
Academic results Period Value
Average credits by student 2024 39.7
Evaluation rate 2024 72.51
Success rate 2024 99.75
Performance rate 2024 72.33
SEGUIMIENTO rates Period Value
Efficiency rate 2024 90.2
Graduation rate 2024 25
Leaving rate 2024 23.33

Centre data

Student enrollment Period Value
Students count 2024 297
Men 2024 147
Women 2024 150
Credits enrolled Period Value
Total enrolled credits 2024 14,356
Credits on 1st enrollment 2024 10,883
Credits on 2nd enrollment 2024 3,336
Credits on 3rd enrollment and above 2024 137
% credits repeated 2024 24.19
Academics results Period Value
Average credits by student 2024 48.34
Evaluation rate 2024 72.54
Success rate 2024 79.75
Performance rate 2024 57.85

Study data

Students enrollment Period Value
Students count 2025 42
Men 2025 18
Women 2025 24
Credits enrolled Period Value
Total enrolled credits 2025 1,626
Credits on 1st enrollment 2025 1,485
Credits on 2nd enrollment 2025 39
Credits on 3rd enrollment and above 2025 102
% credits repeated 2025 8.67
Academic results Period Value
Average credits by student 2025 38.71
SEGUIMIENTO rates Period Value
Graduation rate 2025 64

Centre data

Student enrollment Period Value
Students count 2025 314
Men 2025 150
Women 2025 164
Credits enrolled Period Value
Total enrolled credits 2025 15,441.5
Credits on 1st enrollment 2025 11,586
Credits on 2nd enrollment 2025 2,482.5
Credits on 3rd enrollment and above 2025 1,373
% credits repeated 2025 24.97
Academics results Period Value
Average credits by student 2025 49.18

Facts by subject

Success Not success Not presented

1

Environmental Management Systems
24.0
12.0
11.0
Life Cycle Analysis
23.0
10.0
10.0
Efficient and Innovative Building Materials
22.0
10.0
8.0
Introduction to the Master Thesis: Methodology and Research Planning
24.0
9.0
9.0
Advanced Building Systems
20.0
9.0
7.0
Advanced Information Management in Building: BIM and GiS
23.0
9.0
9.0
Advanced Technologies of Graphic Representation in Building
23.0
8.0
8.0
Principles of Assessment and Certification of Sustainability in Building
25.0
10.0
10.0
Eco-Efficient Structures
27.0
8.0
8.0
Constructive Strategies in Passive and Bioclimatic Architecture
26.0
10.0
10.0
Systems and Installations Based on Renewable Energy and Microgeneration
23.0
7.0
7.0
Techniques for Mounting and Integration of Renewable Energy Systems
23.0
7.0
7.0
Sustainable Strategies with Traditional Constructive Solutions
24.0
17.0
14.0
Smart Cities. Emerging Technologies for Sustainable Cities
24.0
14.0
13.0
Methodologies for Certification of Sustainability in Building (Breeam. Leed. Green)
20.0
6.0
6.0
Methodologies for Certification of Sustainability in Building (Passivhaus)
20.0
12.0
12.0
Selective Demolition and Waste Management. Contaminated Soils
15.0
9.0
8.0
Certification of Acoustic Quality and Acoustic Projects in Building
18.0
7.0
6.0
Energy Audit and Evaluation of Efficiency in Building I: Residential and Small Tertiary Uses
4.0
4.0
4.0
Energy Audit and Evaluation of Efficiency in Building II: Large Tertiary Use
4.0
3.0
3.0
Techniques for Saving and Efficient Use of Energy in Buildings: Energy Refurbishment
3.0
5.0
3.0
Techniques of Air-Conditionning and IAQ Certification of Indoor Environmental Quality in Building
2.0
3.0
3.0
Master's Dissertation
17.0
34.0
34.0

Success Not success Not presented

1

Environmental Management Systems
7.0
2.0
2.0
Life Cycle Analysis
6.0
3.0
3.0
Efficient and Innovative Building Materials
8.0
2.0
2.0
Introduction to the Master Thesis: Methodology and Research Planning
8.0
1.0
1.0
Advanced Building Systems
7.0
2.0
2.0
Advanced Information Management in Building: BIM and GiS
6.0
2.0
2.0
Advanced Technologies of Graphic Representation in Building
5.0
2.0
2.0
Principles of Assessment and Certification of Sustainability in Building
5.0
4.0
3.0
Eco-Efficient Structures
4.0
2.0
2.0
Constructive Strategies in Passive and Bioclimatic Architecture
5.0
3.0
3.0
Systems and Installations Based on Renewable Energy and Microgeneration
4.0
1.0
1.0
Techniques for Mounting and Integration of Renewable Energy Systems
4.0
1.0
1.0
Sustainable Strategies with Traditional Constructive Solutions
8.0
5.0
5.0
Smart Cities. Emerging Technologies for Sustainable Cities
6.0
6.0
6.0
Methodologies for Certification of Sustainability in Building (Breeam. Leed. Green)
3.0
0.0
0.0
Methodologies for Certification of Sustainability in Building (Passivhaus)
9.0
1.0
1.0
Selective Demolition and Waste Management. Contaminated Soils
4.0
2.0
2.0
Certification of Acoustic Quality and Acoustic Projects in Building
6.0
2.0
2.0
Energy Audit and Evaluation of Efficiency in Building I: Residential and Small Tertiary Uses
4.0
1.0
1.0
Energy Audit and Evaluation of Efficiency in Building II: Large Tertiary Use
3.0
1.0
1.0
Techniques for Saving and Efficient Use of Energy in Buildings: Energy Refurbishment
3.0
2.0
2.0
Techniques of Air-Conditionning and IAQ Certification of Indoor Environmental Quality in Building
2.0
1.0
1.0
Master's Dissertation
13.0
13.0
13.0

Success Not success Not presented

1

Environmental Management Systems
24.0
6.0
6.0
Life Cycle Analysis
23.0
6.0
5.0
Efficient and Innovative Building Materials
21.0
5.0
5.0
Introduction to the Master Thesis: Methodology and Research Planning
19.0
7.0
7.0
Advanced Building Systems
23.0
5.0
5.0
Advanced Information Management in Building: BIM and GiS
21.0
5.0
5.0
Advanced Technologies of Graphic Representation in Building
19.0
6.0
6.0
Principles of Assessment and Certification of Sustainability in Building
23.0
6.0
6.0
Eco-Efficient Structures
20.0
7.0
7.0
Constructive Strategies in Passive and Bioclimatic Architecture
21.0
6.0
6.0
Systems and Installations Based on Renewable Energy and Microgeneration
23.0
5.0
5.0
Techniques for Mounting and Integration of Renewable Energy Systems
23.0
6.0
6.0
Sustainable Strategies with Traditional Constructive Solutions
21.0
9.0
9.0
Smart Cities. Emerging Technologies for Sustainable Cities
25.0
7.0
7.0
Methodologies for Certification of Sustainability in Building (Breeam. Leed. Green)
17.0
3.0
3.0
Methodologies for Certification of Sustainability in Building (Passivhaus)
18.0
3.0
3.0
Selective Demolition and Waste Management. Contaminated Soils
16.0
2.0
2.0
Certification of Acoustic Quality and Acoustic Projects in Building
16.0
3.0
3.0
Energy Audit and Evaluation of Efficiency in Building I: Residential and Small Tertiary Uses
3.0
4.0
4.0
Energy Audit and Evaluation of Efficiency in Building II: Large Tertiary Use
2.0
3.0
3.0
Techniques for Saving and Efficient Use of Energy in Buildings: Energy Refurbishment
4.0
6.0
6.0
Techniques of Air-Conditionning and IAQ Certification of Indoor Environmental Quality in Building
2.0
4.0
4.0
Master's Dissertation
23.0
21.0
21.0

Offer places

Offer available places last year and, for degree studies, you can also check the cut notes of those admitted by PAAU.

academic year 2024/2025
General offer 30